APPLICATIONS:

• Motion Control
• Automotive Control
• Industrial Control
• Network Control
• Data logging
• General Purpose I/O Interface

FEATURES:

• Board Size: 1.0"(W) x 1.3"(L) x 0.4"(H)
• Weight: 0.2 Ounces
• Development Tools:
  • GNU GCC
  • ECLIPSE
  • KEIL Software, Free download Demo Version
  • Philips Flash Utility
  • Linux Bootloader Utility
• 32/16-bit ARM7TDMI-S microprocessor
• CPU oprerating range up to 60Mhz
• On-chip Memory
  • 32KByte Program Flash provides minimum 10,000 erase/write cycles, and 10 yrs of data-retention
  • 8KByte Static Ram can be accessed as 8-bits, 16-bits, and 32-bits
• RS-232 Serial Communication Interface
• Two I2C bus Interface (one shared on GPIO connector)
• JTAG connection for flash programming/debugging
• Two PWM channels (one shared on GPIO connector, one shared on JTAG connector)
• 16 General Purpose Digital I/O lines share functions with,
  • 8 channels 10-bit A/D
    • Measurement range 0V to 3.3V
    • More than 400,000 10-bit samples per second
  • Two 4-wire SPI Interface
  • I2C bus Interface
  • PWM channel
  • Timers
    • 8 Input Capture
    • 8 Output Match
  • 4 external Interrupts
• Real Time Clock provides Seconds, Minutes, Hours, Month, Year, Day of Month, Day of Week, Day of Year
• Two low power modes, Idle and Power down
• WatchDog Timer
• Brown-out detector, 2.9V & 2.6V threadholds
• Onboard three user's leds
• Onboard 5.0V, and 3.3V LDO regulators
• 2x12 header pin for Power, Serial, and I/O's connection

Development of the user programming in internal FLASH facilitated through Serial Communnication Interface, or JTAG.Connections to host, Tini2131 makes a very cost effective solution

Accessories required:

• Serial Cable
• 6-12Vdc @ 100mA or higher