To order a complete TiniARM™ Development Kit, Click here !

Click here to download TiniARM™ Getting Started document

APPLICATIONS:

TiniARM™ is suitable for dedicated control of RC Servo motors, DC motors, Brushless DC Motors, stepper motors, solenoids, and other bipolar power outputs, such as general converter/inverter applications, data collection and many networked control applications.

FEATURES:

• Board Size: 1.0"(W) x 1.3"(L) x 0.4"(H)
• Weight: 0.2 Ounces
• Programming Tools & Languages:
  • GNU GCC, Examples & Documents. Last Updated 11/01/04
  • ECLIPSE, Development with Eclipse. Last Updated 6/27/05
  • MPE-FORTH Manual
  • IsoMax™, Preliminary Release now available . Signed license agreement is required. Click here for License detail
  • In-System Programming Flash Utility
• ARM7TDMI-S CPU, 32-bit microprocessor
• CPU oprerating range up to 60Mhz
• Real Time Clock
• On-chip Memory
  • 128KByte Program Flash
    • 10,000 erase and write cycles
    • 1ms programming time for up to a 512 byte line
    • Single sector erase (8KB), or the whole chip erase is done in 400ms
  • 64KByte Static Ram
• 16 General Purpose Digital I/O lines share functions with,
  • 4-wire SPI Interface
  • 4 PWM channels(3 on 24-pin connector, 1 shared with Jtag signal on other connector )
  • 7 Timers
  • 1 SCI (TTL) channel with the addition of a modem interface
  • 3 external Interrupts
• Two Serial Communication Interface (SCI)
  • UART0 is dedicate for RS-232 serial channel
  • UART1 is TTL signals and shared function with GPIO's
• I2C Serial Interface
• JTAG connection for flash programming/debugging
• Two low power modes, Idle and Power down
• WatchDog Timer
• Onboard three user's leds
• Onboard 5.0V, 3.3V, & 1.8V linear regulators
• 2x12 header pin connector for Power, Serial, and I/O's connection

Development of the user programming in internal FLASH facilitated through Serial Communnication Interface, or JTAG. Connections to host, TiniARM™ makes a very cost effective solution

Accessories required:

• Serial Cable
• 6-12Vdc @ 100mA or higher