Byepassing AUTOSTART

[Jawahar]

How can AUTOSTART be byepassed in a PlugaPodS?

Thanks.

[Dave]

Autostart can be bypassed in the same manner as is done on the other "Pods". By connecting SCLK (in this module, PE4, pin 21 on J1) to ground (pin 4 or pin 7 on J1, pin 3 or pin4 on J5), then SCRUB if needed to clear the code.

See page 6 of the Plugapod Getting Started Guide (http://www.newmicros.com/store/product_manual/PlugaPod-QS.pdf) for pin reference.

[Jawahar]

Thanks Dave! Let me try that.