FORTH Startup

[gfs1989]

Hello! <p>I am not obtaining to install language FORTH in board NMIY-0031 just acquired. I followed the instructions to burn another GAL with archive GALU9.JED, burnt a EPROM with archive FORTH31.HEX, added plus a memory circuit RAM in U4 and changed jumper H3 for " program and data". Unhappyly when the board is energized, nothing it happens. When I place the original components (EPROM with monitor and the original GALU9) the board comes back to function. The board is without peripherals. I still do not possess a GAL/EPROM recorder. I requested to a firm that executed the job. When I communicated that the board had not functioned, I got the reply: we only made what he was requested, or either, to record the IS with the archives supplied for the customer. The<br>archives supplied in the diskette are correct?<br>What I can make to identify what is missed? <br> <p>Edited by: gfs1989

[nmitech]

Please give us more detail about your questions. Also provide us as much info as possible, such as the board number, memory available on board, Jumpers, peripherals if present, programming language, etc... Thanks!

[gfs1989]

Hello!<p>I have a NMIY-0031-FP-SPCL board. I would like programing in FORTH language. In order to run FORTH language, the folowing was changed:<br>H3 to "program and data"<br>Add U4 (ZMD6264ADC)<br>GALU9 burned with GALU9.JED file <br>EPROM U2 burned with FORTH31.HEX<p>But the system don't run.<br>When the old components is back, the system run.

[gfs1989]

<p>Edited by: gfs1989