Power Supply Question - Vmax Input

[rlinder]

What is the maximum power supply voltage input for
IsoPod™_V2 and IsoPod™_V2_SR on J1 pins 23&24 ?

[nmitech]

Both Limear & Switching Regulators are spec from 7V up to 25Vdc.

The SR should work fine with the spec on the high side, and the low side can work as low as 6.2V

The Linear Regulator can work as low as 5.5V but to meet the spec of the high side, it requires to have a good heat sink to handle this. For precaution, manufacture suggests for the input voltage of the Linear regulator is 5.5V up to 12Vdc. This will work just fine without heat sink requires.