IsoPod Problem

[udayakumar]

Hi,

I am not able to communicate with my IsoPod using the NMI Term. The problem seems to be with the board, because things work fine with i use a different board.

I cannot send or recieve messages through the serial port. But the all the three LEDs are glow when the power is on.

Can you please make a recommendation. Thank You

[nmitech]

Without detail info on the non working board, I guess your program is corrupted. Have you try to jumper pin PE4(SCLK) to GND and SCRUB it? If you already did, the chances are the IsoMax Kernel is corrupted, or Hardware damaged.

[udayakumar]

I tried that.. but it still doesnt work. If the kernal is corrupted or the board is damaged, can it be fixed. If yes what should i do to get it corrected.
Thank You.

[nmitech]

If the Kernel is corrupted you need JTAG-Cable-10P to reload.

Just in case you need to purchase the Jtag cable, and sign the license aggreement to receive the IsoMax srecord file. Here are the links,

http://www.newmicros.com/cgi-bin/store/order.cgi?form=prod_detail&part=JTAG-Cable-10P

http://www.newmicros.com/cgi-bin/store/order.cgi?form=prod&cat=isomax