RC-Servo-Adaptor and 5A

[Val]

I have IsoPod V2 which will be used to drive 12 servos (at least). Four of them are really big, 300 oz-in, 700mA running with no load. Definitely they need external power source. I think all together servos will need about 6A pick current. So the question is if that adaptor can handle it?

Thanks, Val

[nmitech]

FYI, Here is the previous discussion regarding to the Servo-Adaptor board,

http://www.newmicros.com/discussion/showthread.php?threadid=722